Product information:
Power: 201W (inclusive)-500W (inclusive)
Function: Make noodles
Capacity: 150ml
Speed: 50HZ
Body material: plastic steel
Rated voltage: 220V
Rated frequency: 50HZ
Rated power: 260W
Product color: porcelain white
Product net weight: 4kg
Product gross weight: 5.2kg
Features:
1. A variety of knife mold combinations can be used to make wide noodles, narrow noodles, hollow noodles, dragon beard noodles, etc.;
2. You can add egg liquid, vegetable juice (soft vegetable leaves can be put directly, hard vegetables must be squeezed), etc. to make noodles with different flavors, which are healthy and delicious;
3. The operation is simple, put the flour into the noodles, easy to get;
4. Food grade material, sanitary, healthy, environmentally friendly and practical;
5. Imitate hand kneading, put in an appropriate amount of flour, the machine will automatically mix the flour and water;
6. Excess dough can be cleaned up easily by hand, which is simple and convenient;
7. Multiple safety protection devices, long service life.
Size information:
Packing size: 435x265x315MM
Note:
Safety Precautions:
1. This product is suitable for personal or family use, not suitable for long-term work for commercial purposes;
2. Please add flour and water in strict accordance with the amount of ingredients recommended in the reference table for the ratio of noodles to water, otherwise it will cause the noodles to be made too dry or too wet, and the accessories may be damaged in severe cases;
3. When using manual noodles, make sure that the flour and water are evenly mixed before squeezing the noodles, so as to prevent the dry flour from clogging the cutter head holes and causing damage to the accessories;
4. When making egg noodles, please weigh the eggs and water. It is strictly forbidden to add egg liquid directly.
Instructions:
1. Choose a die
2. Water surface ratio control
3. Noodle making process
3.1 Open the top cover first
3.2 Measure flour
3.3 Water measuring method
4. Pour the measured flour into the mixing bucket
5. First align the top cover card position with the notch on the front of the barrel of the fuselage, press down, and install it in place when you hear a click
6. Plug in the power, press the power button, and then press the corresponding automatic button according to the ratio of the surface. After the stirring is turned, slowly pour the water into the water inlet of the top cover according to the surface water ratio reference table.
7. After about ten minutes, the machine will give an alarm and the noodle making will be completed automatically
Cleaning method:
7.1 Step 1: Drying
7.2 Step 2: Cleaning the mixing tank
7.3 Step 3: Cleaning the mixing shaft
7.4 Step 4: Cleaning the die
Packing list :
A set of pressing machine
Product picture:
Reviews
There are no reviews yet.